Paper Isn't Ejected Fully Or Is Wrinkled; Where To Get Help - Epson STYLUS PHOTO 2000P Instruction Manual

❏ The paper stack was fanned before loading.
❏ The paper isn't loaded above the arrow on the left edge guide.
❏ The left edge guide is adjusted to fit your paper.

Paper isn't ejected fully or is wrinkled

If the paper doesn't eject fully, press the
check the Paper Size setting in your application or printer driver.
If the paper is wrinkled when it comes out, it may be damp or too
thin. Load a new stack.
Note:
Store any unused paper in its original packaging in a dry area. See
"Paper" on page B-2 for specifications.

Where to Get Help

If your printer is not operating properly and you cannot solve the
problem using the troubleshooting information in your printer
documentation, contact customer support services for assistance.
Customer support will be able to help you much more quickly if
you give them the following information:
❏ Serial number of your printer
(The serial number label is on the back of the printer)
❏ Printer model
❏ Brand and model of your computer
❏ Printer software version
(Click About in your printer driver)
E
load/eject button. Also
Troubleshooting
9-23