Epson STYLUS PHOTO 2000P Instruction Manual page 87

3. Double-click the Ports (COM & LPT) icon and double-click
LPT1. If you have connected your printer to a port other than
LPT1, double-click the appropriate port icon.
4. Click the Resources tab, then clear the Use automatic
settings check box. Write down the Input/Output Range
settings shown in the resource settings box.
5. Select a basic configuration setting from the Setting based on
list that uses the same Input/Output Range settings as those
you wrote down in Step 4, and make sure the Direct Memory
Access channel and Interrupt Request numbers are allocated
and displayed. Confirm also that the Conflicting device list
box shows No conflicts.
6. Click OK to save the settings.
7. Reopen the Speed & Progress dialog box to verify whether
DMA transfer has been enabled.
Using the Printer Software for Windows
2-41