Epson STYLUS PHOTO 2000P Instruction Manual page 64

Roll Paper
Option
2-18
Using the Printer Software for Windows
The Roll Paper Option settings are only available
when Roll Paper or Roll Paper - No Margins is selected
as the paper source. These features are not
available when Sheet Feeder or Sheet Feeder - No
Margins is selected.
The settings are as follows:
Banner Mode:
Select this mode when you wish to print multi-page
data as continuous data on the roll paper, rather
than as individual pages. When this check box is
selected, the Save roll paper check box is enabled.
Cut Sheet Mode:
Select this mode when you wish to print multi-page
data as individual pages, rather than as continuous
data. When this check box is selected, the Print page
frame check box is enabled.
Save roll paper:
Select this check box when you wish to save roll
paper. When this check box is selected, the blank
portion of the last page of your document is not fed
through the printer. This feature is only available
when Banner Mode is selected.
Print page frame:
Select this check box to print a line on the roll paper
between pages in a multi-page document to
indicate where the paper should be cut. This feature
is useful when it is unclear where the page breaks
should be. This feature is only available when Cut
Sheet Mode is selected.