Epson STYLUS PHOTO 2000P Instruction Manual page 40

Print page
frame
5. Click the Main tab, and select the appropriate Media Type.
6. Click OK to close the printer driver. Print your document and
proceed to the next section, "Removing the roll paper from
the printer" on page 1-25.
For Macintosh users
Note:
❏ The procedures described in this section may vary, depending upon
which application you are using. Check your application's user
manuals for details.
❏ When printing on roll paper, you cannot use the Reverse Order or
Rotate by 180° features, select Maximum or Centered as the
Printable Area setting, or use the functions in the Layout dialog box.
❏ Do not select PhotoEnhance in the printer driver, because it may
cause offsets in the print area at logical page boundaries.
After the roll paper is loaded in the printer, make sure that the
Stylus Photo 2000P is selected in the Chooser before proceeding.
Follow the steps below to configure your driver for printing.
1. Open the file you wish to print.
1-22
Paper Handling
Select this check box to print a line on the roll
paper between pages in a multi-page
document to indicate where the paper should
be cut. This feature is useful when it is unclear
where the page breaks should be or where the
paper should be cut after the last page has
been printed. This feature is only available when
Cut Sheet Mode is selected.