Epson STYLUS PHOTO 2000P Instruction Manual page 44

1. Press the
easily cut along the printed line. If you are printing on cut
sheets of roll paper which you wish to eject, press the
E
load/eject button until the paper is ejected.
Note:
❏ If you wish to print more data on the same sheet of paper, press
the
will return to the printing start position before printing again.
❏ You must press the
will not operate even if you send a new print job. However, do
not press the
repeated motion may damage the printout.
2. Cut the paper along the printed line. Never pull the paper as
you cut it. Doing so may damage the printout. When cutting
the paper, do not cut inside the line (closer to the printer) as
this may cause paper feed problems.
Note:
EPSON recommends that you use a triangle or other tool to ensure
that the end of the roll is cut perpendicularly. A diagonal cut may
cause paper feed problems.
1-26
Paper Handling
E
load/eject button to feed the paper so that you can
E
load/eject button and send the next print job. The paper
E
load/eject button more than is necessary;
E
load/eject button; otherwise, the printer