Epson STYLUS PHOTO 2000P Instruction Manual page 63

Copies
Orientation
Printable Area
Select the number of copies you wish to print. You
can select Collate to print one set at a time or
Reverse Order to determine the order in which you
print multiple copies of your document.
Select Portrait (tall) or Landscape (wide) to change
the orientation of your printout. If you need to print
closer to the bottom of the page, select the Rotate
by 180° check box.
Use the options in the Printable Area box to adjust
the total area available for printing when Sheet
Feeder or Sheet Feeder - No Margins is selected as
the paper source. This feature is not available when
Roll Paper or Roll Paper - No Margins is selected.
Select Centered to center the printout. To increase
the printable area, select Maximum.
Note:
When Maximum is selected, the print quality may
decline at the edges of the printout. Before printing
large jobs using this setting, print a single sheet to
confirm quality.
When Maximum is selected, make sure the paper
loaded in the sheet feeder is not curled.
Using the Printer Software for Windows
2-17