Sharp AR-M350U Service Manual page 215

66-28
Purpose Setup
Function (Content) Used to record a sound message.
Recording is available in 1 ~ 5, max. 6sec for
one. (Only when FAX is installed.)
Section FAX
Item Operation
Operation/Procedure 1) Record a sound message from the handset.
2) Press CUSTOM SETTING to interrupt
recording
<This mode is for development, and inhibited in the market.>
SIMULATION 66-28
VOICE RECORD. SELECT 1-5, AND PRESS START.
1. MESSAGE1 2. MESSAGE2
4. MESSAGE4 5. MESSAGE5
66-29
Purpose Setup
Function (Content) Used to clear the telephone directory.
Section FAX
Item Operation
Operation/Procedure 1) Select with 10 digit key pad and press START
to execute the following.
1: Telephone directory clear
2: Telephone directory not clear
SIMULATION 66-29
ADDRESS DATA CLEAR.
ARE YOU SURE ?
1. YES
2. NO
3. MESSAGE3
1 <List of set values>
1
<This mode is for development, and inhibited in the market.>
<Display message>
AR-M350 SIMULATIONS 10-71
66-30
Purpose Setup
Function (Content) Used to check TEL/LIU status change.
(Only when FAX is installed.)
Section FAX
Item Operation
Operation/Procedure The TEL/LIU status can be checked.
The display is highlighted when the status is
changed.
SIMULATION 66-30
TEL/LIU SENSOR CHECK.
HS1 HS2 EXHS
RHS
HS1 Polarity reverse signal
HS2 Polarity reverse signal
RHS Handset hook SW
EXHS External telephone hook SW
66-31
Purpose Setup
Function (Content) Used to set the TEL/LIU status.
(Only when FAX is installed.)
Section Fax
Item Operation
Operation/Procedure Entry of only 0 or 1 is effective.
Shift the cursor to the bit to enter.
Cursor shift keys :
The bits are 1, 2, 3, 4, 5, 6, 7, and 8 from the left.
The entered bit is highlighted.
Press STRT to select the relay.
SIMULATION 66-31
TEL/LIU SETTING.
INPUT O 1, AND PRESS START.
MOVEMENT LEFT: [*] RIGHT: [#]
MPXA
1. 2.CION 3. MR
S.
5. 6. CML 7. DP
66-32
Purpose Setup
Function (Content) Used to check the received data.
(Only when FAX is installed.)
Section FAX
Item Operation
Operation/Procedure The fixed data received from the line are
checked.
SIMULATION 66-32
RECEIVED DATA CHECK.
CHECKING...(OK or NG)
CHECKING Checking
OK Checking complete
NG Checking end
1
: * , : #.
1 2 3 4 5 6 7 8
10001100
4. EC
8.