Disassembly And Assembly, Maintenance; Self Print Of Set Values; Maintenance System Table - Sharp AR-M350U Service Manual

[7] DISASSEMBLY AND ASSEMBLY, MAINTENANCE

1. Self print of set values

Use of SIM 22-6 allows to print the set values and the jam history of the machine.
These values must be printed before execution of maintenance or disassembly procedures.

2. Maintenance System Table

A. Scanner / DSPF
Check (Clean, replace, or adjust as necessary.)
Unit name
Optical section Mirror/Lens/Reflector/Sensors
Table glass/OC
White reference glass
Rails
Drive belt/Drive wire/Pulley
DSPF Paper feed section
Transport section
Paper exit section
Other
Finish stamp section
[Option]
(Japan only)
Note 2: Replacement reference: Same as above or 2 years.
Clean
When
Part name
calling
Take-up roller
Separation pad
Paper feed roller
PS roller
Exposure section
(Dust-proof glass)
Paper feed roller SPF
Sensors
Stamp solenoid
Stamp individual part
AR-M350 DISASSEMBLY AND ASSEMBLY, MAINTENANCE 7-1
Replace Adjust
50K 100K 150K 200K 250K 300K 350K 400K
Maintenance cycle : 50K
Lubricate Move position
Remark
Note 2
Note 2
Note 2
For cleaning, blow air.
User replacement
at 10K or 1 year.