Sharp AR-M350U Service Manual page 198

Main code 51
51-2
Purpose Adjustment
Function (Content) Used to adjust the contact pressure of paper on
the resist roller in each section (machine paper
feed, duplex paper feed, SPF paper feed).
(This adjustment is required when the print
image position varies or when paper jam occurs
frequently.)
Section Paper transport
(paper exit, switchback, transport)
Item Operation
Operation/Procedure Perform the resist quantity adjustment.
1) The current set value is highlighted on the
right of each item. In this screen, be sure to
select "1: COPY START." (Set value: 1)
2) Enter the correction value with 10 digit key
pad.
Press P to store the set value.
3) When the value is increased by 1, the resist
quantity is changed by 1ms.
4) Press START to start copying and store the
set value. (Display value: 1)
5) Select a paper feed tray. (Set value 2)
SIMULATION 51-2
RESIST TIMING ADJUSTMENT. SELECT 0-8, AND PRESS START.
0. TRAY SELECT 1 1.PRINT START
2. TRAY1 50 3. TRAY2 50
5. BPT 50 6. ADU 50
7. SPF(HIGH) 50 8. SPF(LOW)
Select 0 or 1,
and press [START] key.
SIMULATION 51-2
RESIST TIMING ADJUSTMENT. INPUT VALUE 0-99, AND PRESS
START.
1. TRAY1
Select 1, and
press [START] key.
SIMULATION 51-2
RESIST TIMING ADJUSTMENT. NOW PRINTING.
Select 0, and
press [START] key.
SIMULATION 51-2
RESIST TIMING ADJUSTMENT. SELECT 1-15, AND PRESS START.
(FEED TRAY)
1. TRAY1 2. TRAY2 3. TRAY3 4. TRAY4
5. BPT
(ABOVE +10: DUPLEX MODE)
4. DESK 50
1
50
Press [CUSTOM SETTING] key.
Press [CUSTOM SETTING] key.
Or copying is terminated.
Press [START] key or
press [CUSTOME SETTING] key.
AR-M350 SIMULATIONS 10-54
<List of set values 1>
0 TRAY Paper feed tray selection (1 - 5)
SELECT
1 PRINT Copy start (Initial value)
START
2 TRAY1 Tray 1 resist adjustment value
3 TRAY2 Tray 2 resist adjustment value
4 DESK Desk resist adjustment value
5 BPT Manual tray resist adjustment value
6 ADU ADU resist adjustment value
7 SPF(HIGH) SPF resist adjustment value
(High speed)
8 SPF(LOW) SPF resist adjustment value
(Low speed)
<List of display values 1>
Normal display
ERROR display Door open
Jam
Paper empty
<List of set values 2>
1 TRAY1
2 TRAY2
3 TRAY3
4 TRAY4
5 Manual feed
* The selected tray is registered as an initial set value in the initial
screen.
45PPM 35PPM
60 65
50 55
50 55
55 60
50 55
50 50
50 50
NOW COPYING
DOOR OPEN.
JAM
PAPER EMPTY.
11 TRAY1 with Duplex
12 TRAY2 with Duplex
13 TRAY3 with Duplex
14 TRAY4 with Duplex
15 Manual feed with Duplex