Using The Centrifuge; Initial Start-Up; Switching The Centrifuge On; Opening And Closing The Lid - Sigma 4-5L Operating Manual

Laboratory Centrifuge Sigma 4-5L
Laboratory Centrifuge Sigma 4-5L IVD

6 Using the centrifuge

→
6 Using the centrifuge
→
6.1

Initial start-up

DANGER
→
6.2

Switching the centrifuge on

→
6.2.1

Opening and closing the lid

WARNING
32 / 82
•
Before the initial start-up, please ensure that your centrifuge is
properly set up and installed (see chapter 5 - "Set-up and
connection").
•
Press the mains power switch.
The display then illuminates. The centrifuge is ready for operation.
The lid can be opened if the centrifuge is at a standstill and if the lid key is
illuminated.
•
Press the lid key in order to open the lid.
The centrifuge cannot be started if the lid is opened.
•
To close, press with both hands slightly on the lid until the lock is
audibly locked.
Do not place your fingers between the lid and the housing when closing
the lid. Risk of crushing!
Translation of the original operating manual, part no. 0701502
Version 10/2013, Rev. 2.20 of 28/04/2022 • sb