Page 1
SERVICE & OPERATING MANUAL Original Instructions Certified Quality Model F15 Metallic Food Processing Pump Constructed with FDA Compliant Materials Design Level 1 ISO 9001 Certified ISO 14001 Certified 1935/2004/EC Warren Rupp, Inc. A Unit of IDEX Corporation 800 N. Main St., Mansfield, Ohio 44902 USA Telephone 419.524.8388...
Page 2
ATEX Pumps - Conditions For Safe Use 1. Ambient temperature range is as specifi ed in tables 1 & 2 on the next page 2. ATEX compliant pumps are suitable for use in explosive atmospheres when the equipment is properly grounded in accordance with local electrical codes 3. Conductive Polypropylene, conductive Acetal or conductive PVDF pumps are not to be installed in applications where the pumps may be subjected to oil, greases and hydraulic liquids. 4. When operating pumps equipped with non-conductive diaphragms that exceed the maximum permissible projected area, as defi ned in EN ISO 80079-36 : 2016 section 6.7.5 table 8, the following protection methods must be applied - Equipment is always used to transfer electrically conductive fl uids or - Explosive environment is prevented from entering the internal portions of the pump, i.e. dry running. sandpiperpump • Model F15 Metallic f15mdl1sm-rev0219 Springer Pumps, LLC Tel: 866-777-6060 Website: www.springerpumps.com Fax: 866-777-6383 Int'l: +001 267 404 2910...
Page 3
Table 2. Category M2 ATEX Rated Pumps for Mining Process Temperature Ambient Temperature Range [°C] Range [°C] -20°C to +60°C -20°C to +150°C Note: The ambient temperature range and the process temperature range should not exceed the operating temperature range of the applied plastic parts as listed in the manuals of the pumps. sandpiperpump Model F15 Metallic • f15mdl1sm-rev0219 Springer Pumps, LLC Tel: 866-777-6060 Website: www.springerpumps.com Fax: 866-777-6383 Int'l: +001 267 404 2910...
D FDA Santoprene / FDA Santoprene Pump Options H FDA Hytrel / FDA Hytrel K PTFE with FDA Hytrel Backer / PTFE None Z PTFE One-Piece Bonded Fusion Diaphragm / PTFE Your Serial #: _____________________________________ (fill in from pump nameplate) *Complies with Code of Federal Regulations (CFR) Title 21 Part 177 sandpiperpump Model F15 Metallic • f15mdl1sm-rev0219 Springer Pumps, LLC Tel: 866-777-6060 Website: www.springerpumps.com Fax: 866-777-6383 Int'l: +001 267 404 2910...
Page 6
NOTE: Performance based on the following: elastomeric fitted pump, flooded suction, water at ambient conditions. The use of other materials and varying hydraulic conditions may result in deviations in excess of 5%. sandpiperpump • Model F15 Metallic f15mdl1sm-rev0219 Springer Pumps, LLC Tel: 866-777-6060 Website: www.springerpumps.com...
Page 7
. For specific applications, always consult the Chemical Resistance Chart. Note: This document is a high level guide. Please be aware that not all model and or material combinations are possible for all sizes. Please consult factory or your distributor for specific details. sandpiperpump Model F15 Metallic • f15mdl1sm-rev0219 Springer Pumps, LLC Tel: 866-777-6060 Website: www.springerpumps.com Fax: 866-777-6383 Int'l: +001 267 404 2910...
The valve should be closed slightly to obtain the most efficient air flow to pump flow ratio. sandpiperpump • Model F15 Metallic f15mdl1sm-rev0219 Springer Pumps, LLC Tel: 866-777-6060 Website: www.springerpumps.com...
Entrained air or vapor lock in chamber(s) . Purge chambers through tapped chamber vent plugs . For additional troubleshooting tips contact After Sales Support at service.warrenrupp@idexcorp.com or 419-524-8388 sandpiperpump Model F15 Metallic • f15mdl1sm-rev0219 Springer Pumps, LLC Tel: 866-777-6060 Website: www.springerpumps.com...
SV170 (See Note 1) FDA Santoprene V163TPEXLFG V171TPEXLFG V170TPEXLFG Notes: 1 .) (4) V170T o-rings are to be used with metallic fitted seats. sandpiperpump Model F15 Metallic • f15mdl1sm-rev0219 Springer Pumps, LLC Tel: 866-777-6060 Website: www.springerpumps.com Fax: 866-777-6383 Int'l: +001 267 404 2910...
Page 14
Warren Rupp brand shall fail under normal use and service due to a defect in material or workmanship within five years from the date of shipment from Warren Rupp’s factory. Warren Rupp brands include Warren Rupp ,SANDPIPER ® ® SANDPIPER Signature Series , MARATHON , Porta-Pump , SludgeMaster™ and Tranquilizer ®...
Page 15
Declaration of Conformity Manufacturer: Warren Rupp, Inc., 800 N. Main Street, Mansfield, Ohio, 44902 USA certifies that SANDPIPER Air-Operated Double Diaphragm Food Processing Pump Models ® and Tranquilizer Surge Suppressor Models comply with the European Community Regulations: ® (EC) No 1935/2004 for Food Contact Materials...
Page 16
ATEX EU Declaration of Conformity Manufacturer: Warren Rupp, Inc. A Unit of IDEX Corporation 800 North Main Street Mansfield, OH 44902 USA Warren Rupp, Inc. declares that Air Operated Double Diaphragm Pumps (AODD) and Surge Suppressors listed below comply with the requirements of Directive 2014/34/EU and all applicable standards. Applicable Standards •...