Operation Using Assign 4, Assign 5, And Assign 6; Setting Specific Functions Using Shortcuts (Ilme-Fr7) - Sony RM-IP500 Operating Instructions Manual

Operation using ASSIGN 4, ASSIGN
5, and ASSIGN 6
Press ASSIGN 4, ASSIGN 5, or ASSIGN 6. The
button is lit yellow, and the adjustment item and
setting of the function assigned to the button is
displayed on the LCD panel.
For details about function assignments to assign
buttons, see "Assigning Functions to Assign
Buttons" (page 51).
Setting Specific
Functions using
Shortcuts (ILME-FR7)
When the IRIS, GAIN, SHUTTER, ASSIGN 4,
ASSIGN 5, or ASSIGN 6 button is pressed on the
menu control block, the setup item and setting
of the function assigned to the button is
displayed on the LCD panel or camera image.
You can change the setting using the VALUE
knob (FUNCTION menu or multi-function dial
mode).
This allows you to set some functions more
quickly than by using normal menu operations.
Note
To use functions displayed on the camera image,
set the camera to superimpose the screen
display on the image output used for operating
this unit.
Target buttons/functions
Dedicated Iris
buttons
ISO/gain
Shutter
ASSIGN 4 to DETAIL level
ASSIGN 6
*1
buttons
Knee point
Exposure
compensation
ND filter
Audio input
level
Camera
assignable
button
Lens FOCUS
HOLD button
*1 Picture profile is not supported on the ILME-FR7.
60
LCD display Setting
display
destination
IRIS Camera
image
ISO/GAIN Camera
image
SHUTTER Camera
image
DETAIL LCD panel
LEVEL
KNEE LCD panel
AE LEVEL Camera
image
ND FILTER Camera
image
AUDIO LVL LCD panel
ASSIGN 1 to Camera
ASSIGN 9 image
FOCUS Camera
HOLD image