Table of Contents
Advertisement
CAMERA
Control
LINK
lamps
setting
OFF
Tally input
lamps 1 to 10
Camera tally
lamp
ON
Tally input
lamps 1 to 10
Camera tally
lamp
LAN
Configures the network of the unit when the unit
and target cameras are connected by LAN
connection.
For details, see "Setting the IP address of the
unit" (page 15).
SERIAL
Configures serial connections when the unit and
target cameras are connected by serial
connection.
For details, see "Configuring a serial connection"
(page 25).
CONTROL I/F
Displays the enabled control interface of
cameras.
When LAN connection is enabled, LAN is
displayed. When serial connection is enabled,
SERIAL is displayed.
SETTING setting
IN
OUT
Displays the
Not lit
tally input
lamp
correspondin
g to the
number of
the camera
with tally
input ON.
The camera tally lamps are
not controlled. A tally lamp
ON/OFF command is not
sent.
Displays the
Not lit
tally input
lamp
correspondin
g to the
number of
the camera
with tally
input ON.
Displays the
The tally
camera tally
lamp of the
lamp
target
correspondin
camera
g to the
becomes the
number of
control
the camera
target, and
with tally
the camera
input ON.
tally lamp
lights up.
AUTO IP SETUP
This menu is used to configure the automatic
assignment of IP addresses of the detected
cameras on the network.
This is used when the unit and cameras are
connected by LAN connection.
SETUP IP
Assigns IP addresses to cameras automatically,
and then assign the cameras to the camera
selection buttons of the unit.
For details, see "Assignment using AUTO IP
SETUP >SETUP IP" (page 18).
ASSIGN CAM
Assigns cameras that already have configured IP
addresses to the camera selection buttons of the
unit.
For details, see "Assignment using AUTO IP
SETUP >ASSIGN CAM" (page 19).
CLEAR TABLE
Clears the camera information.
For details, see "To clear the camera table"
(page 20).
SWAP CAM
Swaps the camera number and camera
information of two cameras registered in the
camera table.
For details, see "To swap camera numbers"
(page 20).
MANUAL
Used to change the group number, camera
number, and IP address assigned to a camera or
clear the camera registration manually.
For details, see "Changing the camera
registration and settings manually" (page 21).
76
Hide quick links:
Advertisement
Table of Contents
