Connection With A Video Switcher - Sony RM-IP500 Operating Instructions Manual

Connection with a video switcher

By connecting the tally output of a video switcher to the GPI I/O connector of the unit, the tally input
lamps of the unit light up in unison with the switcher operation which you can use to switch the target
camera to control.
The following diagram shows the connection with an MCX-500 Multi-Camera Live Producer as an
example.
Connection example
Video signal
MCX-500
Multi-Camera Live Producer
To video monitor
*1 Use a connection cable designed for the switcher being used. For the specifications of the GPI I/O
connector of the unit, see "Pin assignments" (page 83).
BRC-X1000,
BRC-H800
Video signal
Tally/contact signal: Connection cable
Video signal: HDMI cable
Video signal: Connection cable with BNC connectors
SRG-360SHE
Video signal
Tally signal
*1
26
BRC-H900
RM-IP500