Menu Configuration And Basic Operation; Basic Operation - Sony RCP-920 Operation Manual

Menu Configuration and

Basic Operation

The RCP-920/921 provides menu operations for various
functions such as adjustments of system equipment.
Basic operation
In the factory default condition, the first page of the paint
menu appears on the LCD panel when power is supplied.
During subsequent use, the last used menu page will
appear.
For information on how to switch from and to other menu
pages, see "Menu transition diagram" (page 43).
Paint menu
1
Display the menu.
The paint menu appears when power is supplied.
To call up other paint menu pages, press v or V on the
MENU UP/DOWN button in the paint control block.
2
Set or adjust the item.
Turn the paint control for the respective setting to
adjust the value (or select a setting).
Note
In the following cases, some items cannot be operated
from the paint menu.
Button status
ABSOLUTE button: Lit
ABSOLUTE button: Lit
FLARE button: Out
ABSOLUTE button: Lit
FLARE button: Lit
ABSOLUTE button: Lit
1)
SD button: Out
ABSOLUTE button: Lit
1)
SD button: Lit
1) Only when an SD function is assigned to either of the
spare buttons. You can assign an SD function to the
spare button in the SW ASSIGN menu of the
configuration menu.
40

Menu Configuration and Basic Operation

Unavailable items
WHITE
COLOR TEMP
DETAIL LEVEL
BLACK
FLARE
DETAIL LEVEL
SD DETAIL LEVEL
Configuration menu
1
Display the configuration menu.
Press the ENTER button once to go to the top page of
the paint menu.
Press the ENTER button again and hold it for at least
1 second. The top page of the configuration menu
appears.
2
Go to the page with the item to be set.
Turn the right paint control to move the cursor to the
setting or adjustment item that you want to set, and
press the ENTER button. A display for the respective
setting appears. Use the v and V buttons as required
to move between pages.
3
Select the item.
Turn the paint control to move the cursor to the item
and press the ENTER button. The cursor shape
becomes "?."
4
Set or adjust the item.
Turn the right paint control to adjust the value (or
select a setting), and press the ENTER button. The
change becomes active, and the cursor shape returns to
">."
Note
For pages which contain a "SET" item, any changes
on the page will not become active until confirmed by
the setting procedure. To do this, move the cursor to
"SET" and press the ENTER button twice.