Default Values - Sony RM-IP500 Operating Instructions Manual

Default values

The state of each control block on the control
panel is given below.
• The ACTIVE button is on (button is lit) on the
color adjustment block, lens control block, and
preset memory control block.
• The DIRECT RECALL button is on (button is lit)
on the preset memory control block.
• The CAMERA 1 button is on (button is lit yellow)
on the camera selection block. "1" (group
number 1) is displayed in the group number
display.
• The RM MENU button is on (button is lit) in the
menu control block, and the top menu is
displayed on the LCD panel.
All camera information in the camera table is
cleared, and the settings for camera information
items are undefined.
The settings of all setup items in the RM menu
are returned to their default values, shown in the
following table.
Menu item Sub menu
item
OPERATION WHITE
OTHER
CONFIG RM SETUP
SW ASSIGN
DIRECTION
GPI I/O
LAN
SERIAL
CONTROL I/F
AUTO IP SETUP SETUP IP
ASSIGN CAM [FROM] GROUP
MAINTENANCE JOYSTICK
*1 ILME-FR7 only. When MEM.A is selected on the
camera, the WHITE knob adjusts the color
temperature and tint, respectively.
*2 Default value of 50 for models sold in China.
63
Setup item Default value
*1
WB MODE MEM.A T/T
PRST SPEED 24
AE CONFIG MANUAL
AE CONFIG2 ALL
CAM POWER EACH
ZOOM LEVER
*2
CAMERA FREQ 59.94
LCD BRIGHT 5
LAMP DIMMER 5
ASSIGN1 BACKLIGHT
ASSIGN2 FLICKER
ASSIGN3 STATUS
ASSIGN4 DETAIL
ASSIGN5 KNEE
ASSIGN6 AE LEVEL
IRIS KNOB IRIS
JOYSTICK PAN STANDARD
JOYSTICK TILT STANDARD
ZOOM LEVER STANDARD
FOCUS DIAL STANDARD
SETTING INPUT
TALLY MODE NORMAL
COMMAND SEL STANDARD
CAMERA LINK ON
IP 192.168.0.10
SM 255.255.255.0
GW 0.0.0.0
BAUD RATE 9600
LAN
[FROM] IP 192.168.0.1
[TO] IP 192.168.0.254
01
NUM
[FROM] CAMERA 01
NUM
SENSITIVITY 5