Table of Contents
Advertisement
10
Restore factory settings
The factory settings of the accessory can be re-
stored. If you do this, you will lose all your settings.
To restore the factory settings of the accessory, proceed
as follows:
1. Once mounted, the electronic unit (A) can easily
be pulled out of the wall mounting plate. Grab the
sides of the electronic unit and pull it from the wall
mounting plate.
2. Remove a battery.
3. Insert the battery again and long press the system
button (C) at the same time until the LED quickly
starts flashing orange (see figure 13).
4. Release the system button (see figure 14).
5. Long press the system button (C) again until the
LED lights up green (see figure 15).
6. Release the system button to finish the procedure.
»
The accessory will perform a restart.
Restore factory settings
33
Advertisement
Table of Contents
