Configuration; Automatic Mode - Daikin homecontrols EKRCTRDI2BA Installer And User Manual

Configuration

6 Configuration
The configuration of the accessory can be set up complete-
ly in the ONECTA app. For further information on configura-
tion of the accessory without using the DHC Access Point,
see the DHC Application Guide.
The following modes and settings can be adjusted:
6.1
6.2
6.3
6.4
6.5
6.6
6.1

Automatic mode

In automatic mode, the temperature is controlled in accor-
dance with the set schedule. Manual changes are activated
until the next point at which the schedule changes. After-
wards, the defined schedule will be activated again.
24
Automatic mode
Manual mode
Offset temperature (not yet available)
Programming a schedule
Operating lock (not yet available)
Holiday mode