Daikin homecontrols EKRCTRDI2BA Installer And User Manual page 19

To connect the DHC Room Thermostat to the DHC Access
Point, proceed as follows:
1. Open the ONECTA app.
2. Click on the plus symbol (+).
3. Select the menu item Add Daikin Home Controls.
4. Select Add DHC Accessory (see figure 4).
5. Open the battery compartment (G) using a slotted
screwdriver to loosen the wall mounting plate (see
figure 3).
6. Remove the insulation strip from the battery com-
partment.
» Connection mode remains activated for 3 minutes.
You can manually start the connection mode for
another 3 minutes by pressing the system button
(C) shortly (see figure 4).
7. Follow the instructions in the app.
Start-up
19