Minolta Dimage Scan Elite II Hardware Manual page 17

Disconnecting the IEEE cable with Windows ME
To disconnect the scanner, quit the DiMAGE Scan Utility. Left click on the unplug-or-
eject-hardware icon located on the task bar. A small window will open indicating the
device to be stopped.
Click on the small window to stop
the device. The safe-to-remove-
hardware window will open. Click
OK. Turn the scanner off and
then disconnect the cable.
When more than one external device are con-
nected to the computer, repeat the procedure
above except right click on the unplug-or-eject-
hardware icon. This will open the unplug-or-
eject-hardware window after clicking on the small
window indicating the unplug operation.
On the unplug-or-eject-hardware window, the
hardware devices to be stopped will be dis-
played. Highlight the device by clicking on it then
click the stop button.
A confirmation screen will appear to indicate the
devices to be stopped. Click the OK button to stop
the device.
A third and final screen will appear to indicate the
scanner can be safely disconnected from the com-
puter; click OK. Turn the scanner off and then dis-
connect the cable.
17