Checking Software Installation - Windows - Minolta Dimage Scan Elite II Hardware Manual

Checking software installation – Windows
If the scanner was connected to the computer before the DiMAGE Scan Utility was installed, the
computer may not recognize the scanner unit. Windows 2000 Professional, and XP users should
log on with the administrator privilege. With Windows 2000 Professional and XP, the "Digital sig-
natures not found" message may appear when the computer first detects the scanner. The addi-
tional message "Installing hardware...Window log test is not passed" may appear when Windows
XP is launched. Simply click the OK (2000) or continue button (XP).
1. Turn off the computer and disconnect the scanner. Restart the computer.
2. Windows 98, 2000, Me:
Windows XP:
3. Windows 2000 and XP:
Windows 98 and Me:
4. The driver file should be located in the imaging-device location of the device manager. Click on
the location to display the files. When using a USB interface, DS_Elite2 should be listed as the
imaging device. When using an IEEE interface, MINOLTA DS_Elite2 IEEE 1394 SBP2 Device
should be listed as the imaging device.
If these files are not located in the imaging-device location, open the other-devices location of
the device manager. If DS_Elite2 or MINOLTA DS_Elite2 IEEE 1394 SBP2 Device is listed, fol-
low steps 5 through 9 to delete and reinstall the correct driver.
5. Click on the driver to select it for deletion.
6. Windows 2000 and XP:
Windows 98 and Me:
7. Restart the computer.
8. Install the DiMAGE Scan Utility software; refer to the software manual.
9. Turn off the computer and reconnect the scanner.
right click on the My-computer icon. Select "properties" from the
drop-down menu.
from the start menu go to the control panel. Click on the perform-
ance and maintenance category. Click the system button to open
the system properties window.
select the hardware tab in the properties window and click the
device-manager button.
click the device-manager tab in the properties window.
click on the action button to display the drop-down menu. Select
uninstall. A confirmation screen will appear. Clicking the yes button
will remove the driver from the system.
click the remove button. A confirmation screen will appear. Clicking
the yes button will remove the driver from the system.
21