Table of Contents
Advertisement
2.4
Integration
Integration
The following figure shows how the ET200pro with RF170C is integrated in an automation
system.
Figure 2-6
The RF170C is integrated in the hardware configuration by using a Hardware Support
Package (HSP) or the GSD/GSDML file of the interface module. The RF170C can then be
configured using the device configuration of STEP 7 Basic/Professional (TIA Portal), Hardware
Config of the SIMATIC Manager or another engineering system. The HSP or the GSD/GSDML
file are available to you at the "Siemens Industry Online Support" website.
2.5
Planning data throughput
Using the measurement example on the SIOS page "Determining the transmission time
(https://support.industry.siemens.com/cs/ww/en/view/82255083)", you can already check
during the planning of a system whether the data throughput of the planned configuration
meets your expectations.
SIMATIC RF170C
Operating Instructions, 02/2022, J31069-D0176-U001-A6-7618
Example of integration
Description
2.4 Integration
19
Advertisement
Table of Contents
