Christie CP2220 Installation And Setup Manual page 10

Approximate height to center of projector lens
121.6 to 126.5 cm (49.4 to 51.8 inches)
126.6 to 131.5 cm (51.9 to 54.3 inches)
CP43xx-RGB and CP44xx-RGB
115.4 to 120.3 cm (45.4 to 47.8 inches)
120.4 to 125.3 cm (47.9 to 50.3 inches)
125.4 to 130.3 cm (50.4 to 52.8 inches)
130.4 to 135.3 cm (52.9 to 55.3 inches)
135.4 to 140.3 cm (55.4 to 57.8 inches)
•
•
•
For example, if the distance from the center of the port window to the floor is 125 cm (49.2
inches) for a CP4230, set the leg extension position to 2.
3. Slide up the bottom frame (containing the pedestal feet) of the pedestal.
4. Make sure all four corners of the pedestal are adjusted to the same leg extension position.
5. To hold the extended frame in position, install the four screws into each of the four outside
bottom corners of the pedestal.
6. Turn the Christie Rack Mount Pedestal over so its feet or casters are on the floor.
Christie Rack Mount Pedestal Installation and Setup Guide
020-100632-04 Rev. 1 (08-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Height may vary due to the variations in the projector foot height.
Caster removal subtracts 1.7 cm (0.7 inches) from the minimum heights.
Pedestal feet provide an additional 5 cm (2.5 inches) of leveling adjustment.
Installation and setup
Leg extension position
3
4
—
1
2
3
4
10