12.1 Drinks distribution - hot water
After having positioned the appropriate container under the hot
water nozzle (10), distribution is made in two ways.
DOSED FUNCTION
Press one of the hot water distribution keys (
The corresponding led will light up, hot water will be issued
and will stop automatically upon completion.
The distribution may be interrupted at any time by pressing the
previously active key again (shown by the lighted led).
CONTINUOUS FUNCTION
Press the hot water distribution key (13c) and keep pressed
for approximately 3 seconds.
Hot water will be issued continuously until the hot water key
(13c) is pressed again to stop this function.
In continuous function the progrmmed dosed in the key is
not changed.
12.2 Drinks distribution - steam
Completely immerse the right (9) or left (20) steam nozzle into
the container with the liquid to be heated and push the steam
control lever (11 or 17) upwards.
Wait until the liquid has reached the desired temperature, then
lower the steam command lever to stop the issue of steam.
activate steam dispensing at least once.
13a
or 13c).
13b
13c
10
17
20
32
11
9