Delivery Of The Coffee; Hot Water Dispensing - Cimbali M34 SELECTRON Use And Installation

press.
11
in place. Position the cup (or cups) under the spout (or
Press the coffee distribution key
corresponding to the desired dose. The corresponding
led lights up, the coffee will be issued and will stop
automatically upon completion.
Press the continuous/STOP distribution button for a
continuous distribution.
The distribution, both dosed and continuous, may be
interrupted at any time by pressing the continuous/STOP
key.
Scalding hazard!
insulating devices (A) to move the water and
steam wands.
The dispensing of hot water is controlled by the economizer
which permits mixing hot water from the boiler with fresh
cold water from the mains and controls its temperature.
With this system, water quality is improved and assures
the best results for the operator.
Place the appropriate container under the hot-water
dispenser (8).
Press the hot-water dispensing key (12).
The programmed dose of hot water will pour from the
dispenser (8) and will stop automatically.
NOTE:
- When using any of the dosing buttons, the distribution
may be interrupted at any time by pressing the previously
active key again.
- The adjustment of the economizer for regulating the
delivered water temperature is made by the installing
service technician.

13. Delivery of the coffee

11), clean it of the used coffee
11).

14. Hot water dispensing

Use the appropriate
11
12 EN
12
8
A