Hitachi S1 Series Basic Manual page 9

S1 series standard inverter
Note:

Use proper torque to tighten the screws.

Keep the inverter and its parts and components away from combustible materials during
maintenance and component replacement.

Do not carry out insulation voltage-endurance test on the inverter, or measure the control
circuits of the inverter with megameter.

Take proper anti-static measures on the inverter and its internal parts during maintenance and
component replacement.
1.4.4 What to do after scrapping


The heavy metals inside the inverter should be treated as industrial effluent.
When the life cycle ends, the product should enter the recycling system.
Dispose of it separately at an appropriate collection point instead of placing it
in the normal waste stream.
-4-