Hitachi S1 Series Basic Manual page 134

S1 series standard inverter
Function
Name
code
P07.33 Running frequency of present fault
P07.34 Ramps reference frequency of present fault
P07.35 Output voltage of present fault
P07.36 Output current of present fault
P07.37 Bus voltage of present fault
P07.38 Max. temperature of present fault
P07.39 Input terminal state of present fault
P07.40 Output terminal state of present fault
P07.41 Running frequency of the last fault
P07.42 Ramps reference frequency of the last fault
P07.43 Output voltage of the last fault
P07.44 Output current of the last fault
P07.45 Bus voltage of the last fault
P07.46 Max. temperature of the last fault
P07.47 Input terminal state of the last fault
Detailed parameter description
17: External fault (EF)
18: 485 communication fault (CE)
19: Current detection fault (ItE)
20: Motor autotuning fault (tE)
21: EEPROM operation fault (EEP)
22: PID feedback offline fault (PIDE)
23: Brake unit fault (bCE)
24: Running time reached (END)
25: Electronic overload (OL3)
26: Keypad communication error (PCE)
27: Parameter upload error (UPE)
28: Parameter download error (DNE)
29 - 31: Reserved
32: To-ground short-circuit fault 1 (ETH1)
33: To-ground short-circuit fault 2 (ETH2)
34: Speed deviation fault (dEu)
35: Mal-adjustment fault (STo)
36: Underload fault (LL)
37: Safe torque off (STO)
38: Channel H1 safety circuit exception (STL1)
39: Channel H2 safety circuit exception (STL2)
40: Channel H1 and H2 exception (STL3)
41: Safety code FLASH CRC fault (CrCE)
-129-
Default
Modify
value
●
0.00Hz
●
0.00Hz
●
0V
●
0.0A
●
0.0V
●
0.0° C
●
0
●
0
●
0.00Hz
●
0.00Hz
●
0V
●
0.0A
●
0.0V
●
0.0° C
●
0