Xtool X100 PAD User Manual page 4

Xtool X100 PAD User Manual Instructions
Please read this user manual carefully before using the X100 PAD.
When reading the manual, please pay special attention to the words "Note",
"Caution" or "Warning", read them carefully for appropriate operation.
Avoid shaking or dismantling the unit as it may damage the internal
components.
Do not use hard or sharp objects to touch the LCD screen; do not use excessive
force; do not expose the screen to strong sunlight for a long period.
Caution: keep it away from water, moisture, high temperature or very low
temperature.
If necessary, calibrate the screen before testing to ensure the accuracy of LCD
performance.
Keep the main unit away from strong magnetic fields.
For safe operation please follow the instructions below:
Keep the scanner away from heat or fumes when using it.
If the vehicle battery contains acid, please keep your hands and skin or fire
sources away from the battery during testing.
Exhaust gas of vehicle contains harmful chemicals, please ensure adequate
ventilation.
Do not touch the cooling system components or exhaust manifolds when
engine is running due to the high temperatures reached.
Make sure the car is securely parked, Neutral is selected or the selector is at P
or N position to prevent the vehicle from moving when engine starts.
Make sure the (DLC) diagnostic link connector is functioning properly before
starting the test to avoid damage to the Diagnostic Computer.
Do not switch off the power or unplug the connectors during testing, otherwise
you may damage the ECU and/or the Diagnostic Computer.
Xtool X100 PAD Main Unit
Operation Instructions
2
X100 PAD