Canon XA60 Instruction Manual page 86

Using the GP-E2 GPS Receiver
To adjust the date and time automatically according to the GPS data
You can set
have the camcorder automatically adjust its date and time settings according to the information
received from the GPS signal. The date and time will be updated automatically the first time a
correct GPS signal is acquired after turning on the camcorder.
• While the automatic date/time adjustment is activated, the
[Date/Time] setting will not be available.
86
• The time will not be updated while recording.
IMPORTANT
• In certain countries/regions, the use of GPS may be restricted. Be sure to use the GPS receiver in
accordance with local laws and regulations of the country/region where the receiver is used. Be
particularly careful when traveling outside of your home country.
• Be careful about using the GPS receiver in places where the use of electronic devices is restricted.
• The GPS information recorded with clips and photos may contain data that can lead others to
locate or identify you. Be careful when sharing geotagged recordings with others or when uploading
them to the Web.
• Do not leave the GPS receiver near strong electromagnetic fields such as near powerful magnets
and motors.
NOTES
• The GPS information recorded with clips corresponds to the location at the start of the recording.
• Do not place cables connected to the SDI OUT terminal (
the receiver. Doing so may negatively affect the GPS signal.
• Initial GPS signal reception will take longer after replacing the receiver's battery or when first turning
on the receiver after a prolonged period of having been turned off.
• The camcorder is not compatible with the receiver's digital compass and positioning interval
functions. Also, the [Set Now] option is not available for the [GPS Auto Time Setting] setting.
> >
[B System Setup] [GPS Auto Time Setting] to [i Auto Update], to
>
only) or HDMI OUT terminal near
>
[B System Setup]