Table of Contents
Advertisement
Operation
Group Scan (GS) Mode
GS Mode has CH09 to CH20 in the SCAN Memory by default. Channels
must be stored to the GS SCAN Memory before group scan can start.To
add/remove channels from GS SCAN Memory, refer to p.17.
Includes the accessory feature Priority Watch which allows you to
monitor the Instant Priority Channel while scanning (see p.22 for setting
Instant Priority Channel and p.22 to turn on Priority Watch).
If scanning stops on a channel which is not a Priority Channel, UHF
CB Radio will continue monitoring the Priority Channel for activity while
listening to the active one.
To select GS scan mode,
1. Press [MENU/MEM] 7 times.
2. Press ▲ or ▼ to change the setting to GS SCAN (Group Scan)
3. Press & hold [MENU/MEM] to save and exit.
UNIDEN UH810S/UH820S
21
Handheld UHF-CB Transceiver
Advertisement
Table of Contents
