Preset; Exposure; Lens (Dc Or Esc); Brightness - Adjusts Brightness Of The Image - Speco Intensifier H HINT81H Installation And Operation Manual

Using the On-Screen Display(OSD) Menu
• To access an OSD setup menu item, simply press the MENU button
to display the menu screen as shown below. Use UP and DOWN
buttons to move the cursor to a desired menu item and user
LEFT/ RIGHT buttons to change its option.
6. 2.

PRESET

This menu can be set according to the surroundingenvironment.
It is consists of INDOOR, OUTDOOR, LOW LIGHT, HALLWAY,
LOBBY(D-WDR) and ELEVATOR.
6. 3.

EXPOSURE

6.3.1. LENS (DC or ESC)

Select LENS using the the UP or DOWN button. It is possible to adjust
ESC, DC using the LEFT or RIGHT button. Select DC and Press the
MENU button. DC Lens is activated.
6.3.2. BRIGHTNESS – Adjusts brightness of the image.
It is possible to adjust it within 0 ~ 20 using the LEFT or RIGHT button.
6.3.3. SHUTTER – Adjusts the shutter speed.
It is possible to adjust AUTO, 1/60, 1/120, 1/250, 1/700, 1/1K,
1/1600, 1/2500, 1/5K, 1/7K, 1/10K, 1/30K, 1/60K, 1/120K level
using the LEFT or RIGHT button.
If ESC is selected, the AUTO is automatically controlled depending
on the ambient illumination of the subject.
DC: 1/60 SEC Default
NTSC SHUTTER AUTO: 1/60 ~ 120,000
14
LEFT / RIGHT
SPECO TECH
PRESET INDOOR
MAIN SETUP
EXIT
EXPOSURE
LENS DC
BRIGHTNESS 8
SHUTTER 1/60
FLK OFF
AGC 20
SENSE UP X4
RETURN
ESC: AUTO Default
Operating Camera