Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Speco HHDO15D1G
Summary of Contents for Speco HHDO15D1G
- Page 1 INSTRUCTION MANUAL 1080p HD-SDI Weather/Vandal Resistant Dome Camera HHDO15D1G Speco Technologies is constantly developing product improvements. Rev. 11/01/2012 We reserve the right to modify product design and specifications without notice and without incurring any obligation.
-
Page 2: Table Of Contents
Contents Contents ............1 ◑ Precautions ..........2, 3 ◑ Safety Instructions ........4 ◑ Package Contents ........5 ◑ Camera Installation ........6-8 ◑ Specifications ..........9 ◑ Camera Dimension ........10 ◑ Features ............11 ◑ OSD Menu Details ........12- 35 ◑... -
Page 3: Precautions
Precautions Do not install the camera in Do not install the camera under Do not touch the front lens of the extreme temperature conditions. unstable lighting conditions. camera. Only use the camera under conditions Severe lighting change or flicker can This is one of the most important parts of where temperatures are between cause the camera to work improperly. - Page 4 CAUTION RISK OF ELECTRIC SHOCK CAUTION DO NOT OPEN CAUTION RISK OF ELECTRIC SHOCK CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK RISK OF ELECTRIC SHOCK DO NOT OPEN DO NOT OPEN DO NOT REMOVE COVER(OR BACK). CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK NO USER-SERVICEABLE PARTS INSIDE.
-
Page 5: Safety Instructions
Safety Instructions Precautions for use ◑ This camera should be installed by qualified personnel only ◑ There are no user serviceable parts inside ◑ Do not disassemble this camera other than to make initial adjustments ◑ Use a UL approved regulated 24 volt AC or 12 volt DC power supply ◑... -
Page 6: Package Contents
Package Contents Please make sure that the following items are included in the Package: 1) HHDO15D1G • 1 Video Test Connector, Power Jack • 1 Chameleon Cover • 1 Wrench • Set Screw - 3 Tapping Screws 4x40 - 3 Plastic Anchor... -
Page 7: Camera Installation
CAMERA INSTALLATION... - Page 8 CAMERA INSTALLATION Compatibility 1) HHDO15D1G INTWM INTPM CVCJBD...
-
Page 9: Camera Installation
CAMERA INSTALLATION 1. HHDO15D1G PLASTIC ANCHOR 6x30, 3EA VANDAL DOME BASE ASSEMBLY TAPPING SCREW 4X40, 3EA VANDAL DOME BODY ASSEMBLY BODY OUTER COVER... -
Page 10: Specifications
1080p HD-SDI (Weather/Vandal Resistant Dome Camera) DC Auto Iris Varifocal Lens 2.8-10mm ■ HHDO15D1G (2.8-10mm) MEGA PIXEL SPECIFICATIONS HHDO15D1G MODEL Image Sensor Sensor Type 1/3" PANASONIC 2.1Mega CMOS Sensor Total Pixels 2010(H) X 1092(V), 2.22M Pixels Active Pixels 1944(H) X 1092(V), 2.12M Pixels... -
Page 11: Camera Dimension
CAMERA DIMENSION 1) HHDO15D1G 5.10” dia 5.10” dia 3.93” dia... -
Page 12: Features
Digital DNR(Digital Noise Reduction) Noise Reduction ☞ SPECO DNR technology utilizes both an adaptive 2D filter reducing noise in the brightness of the Digital 3D-DNR Noise Reduction image and an adaptive 3D filter reducing noise caused by movement. The result is that HD-SDI... -
Page 13: Osd Menu Details
How to Set Up the camera menu Setup Menu ●... -
Page 16: Menu Set Up
Menu Set Up Menu items can be selected by using the OSD buttons of the camera 1. Press the Set Up button. * The Set Up menu will be displayed on the monitor. SETUP 1.LENS 2.EXPOSURE 3.WHITE BAL 4.DAY / NIGHT COLOR 5.NR 6.SPECIAL... - Page 17 3. Change menu settings using the Left or Right button. * Available values or Status are displayed by pressing the Left or Right buttons. Press the button until desired value / status is displayed. 4. After Changing the setting, move the arrow indicator to EXIT and press the SET button to EXIT.
- Page 18 Exposure This function is used to select Automatic or Manual shutter speed control. 1. On the Set Up menu screen select EXPOSURE by using the Up or Down button. 2. Select the desired shutter mode by pressing the Left or Right button. SETUP 1.LENS 2.EXPOSURE...
- Page 19 * AGC(AUTO GAIN CONTROL): A higher gain increases brightness but also increases any noise. OFF : Deactivate the AGC function LOW : Set automatic gain control to LOW. MIDDLE : Set utomatic gain control to MIDDLE. HIGH : Set automatic gain control to HIGH * SENS - UP: At night and/or in dark conditions, the Sens-Up mode can be selected to desired value from x2 ~ x60 SENS-UP...
- Page 20 * RETURN: Select Return to save the changes in the EXPOSURE menu and return to the SETUP menu. NOTE * Pressing the SET button in AUTO mode allows adjustment of image brightness by increasing or decreasing the shutter speed (x2 ~x60). * The higher the level, the brighter the image becomes, but it is possible that an after image (ghosting) could appear.
- Page 21 HSBLC OFF HSBLC ON * ACCE: contrast enhancement by Digital Dynamic Range Compensation. →OFF: ACCE function does not operate. WDR compensates for bright and dark areas in the same scene. ACCE OFF ACCE ON * RETURN: Select Return to save the changes in the EXPOSURE menu and return to the SETUP menu. * DEFOG: Adapt visibility enhancement on the low contrast scene.
- Page 22 * BLC(Back Light): This camera witch is using 3D-DNR DSP provides intelligent light level control to overcome even strong backlight conditions. GAIN MIDDLE AREA DEFAULT RETURN * OFF: BLC function does not operate. * BLC: Select LOW/MID/HIGH User can select and define a specific area in scene and view the area clearly. Press the Enter button to adjust the position of the area selected as shown in picture 1.
-
Page 23: White Balance
White Balance The White Balance function is used to control the “on-screen” colors. 1. Move the arrow indicator to WHITE BAL on the SETUP menu screen using the Up and Down button. 2. Select the desired mode by using the Left or Right button. SETUP 1.LENS 2.EXPOSURE... - Page 24 Day / Night Picture can be displayed in either color of black and white. 1. Select DAY / NIGHT using the Up or Down button on the SETUP menu screen. SETUP 1.LENS 2.EXPOSURE 3.WHITE BAL 4.DAY / NIGHT COLOR 5.NR 6.SPECIAL 7.ADJUST 8.RESET...
- Page 25 IR SMART GAIN SIZE AREA RETURN AREA SMART IR OFF SMART IR ON → AUTO: The mode will automatically switch to COLOR in normal condition and switch to BW mode when ambient illumination is low. Press the SET button to set the switching time or D→N(AGC), N→D(AGC) in AUTO mode. DAY &...
- Page 26 3DNR is used to reduce the level of background noise in a low luminance environment. 1. Move the arrow indicator to NR by using the Up and Down button. SETUP 1.LENS 2.EXPOSURE 3.WHITE BAL 4.DAY / NIGHT AUTO 5.NR 6.SPECIAL 7.ADJUST 8.RESET 9.EXIT...
- Page 27 Special When the SETUP menu screen is displayed, select SPECIAL using the Up and Down buttons. SETUP 1.LENS 2.EXPOSURE 3.WHITE BAL 4.DAY / NIGHT AUTO 5.NR 6.SPECIAL 7.ADJUST 8.RESET 9.EXIT Select one of the mode using the Up and Down button. SPECIAL 1.
- Page 28 NOTE * When CAMERA TITLE is set to OFF, the CAMERA TITLE is not displayed on the monitor. 1-3) Press the SETUP button. CAM TITLE 0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z →...
- Page 29 NOTE * In cases where the wrong Camera ID has been entered. Move the cursor to CLR and press SETUP button to erase characters from left to right, and repeat the above steps to input the characters again. 1-5) How to select the position where the Camera ID should be displayed on the screen. ①...
- Page 30 ③ Select a new position by using the four C A M 1 directional button, Press the SET button to confirm the position. 2. D - EFFECT Move the cursor to D-EFFECT and press the SET button to set the other image functions. D-EFFECT FREEZE MIRROR...
- Page 31 * V-FLIP : Flip the image vertically on the screen. * ROTATE : Flip the image vertically and horizontally on the screen. * OFF : Disabled. MIRROR ON MIRROR OFF 2-2) DIGITAL - ZOOM: up to x64 bi-cubic linear digital zoom and PIP using anti-aliasing down scaling. PAN : The pan range can be controlled between -10 ~ + 100 TILT : The tilt range can be controlled between -10 ~ + 100 D-ZOOM...
- Page 32 2-3) NEG. IMAGE : ON : Activate negative image just like film OFF : Normal image 2-4) RETURN : Move the arrow indicator to RETURN after complete the setup to return to SPECIAL menu. 3. MOTION MOTION SELECT AREA1 DISPLAY SENSITIVITY MOTION VIEW DEFAULT...
- Page 33 4. PRIVACY Disable an area on the screen. 4-1). When the SPECIAL menu screen is displayed, press the Up and Down buttons to set to PRIVACY. PRIVACY SELECT AREA1 DISPLAY COLOR DEFAULT RETURN POSITION SIZE 4-2). Set up the area mode using the 4 direction buttons. ①...
- Page 34 ③ Adjust the width of the area by using the left/right button. ④ Adjust the height of the area by using the left/right button. ⑤ Move the arrow indicator to the LEFT / RIGHT and TOP / BOTTOM to select the desired area positon by using the LEFT or RIGHT button.
- Page 35 Adjust 1. When the SETUP menu screen is displayed, select ADJUST using the Up and Down button. SETUP 1.LENS 2.EXPOSURE 3.WHITE BAL 4.DAY / NIGHT AUTO 5.NR 6.SPECIAL 7.ADJUST 8.RESET 9.EXIT 2. Select the desired mode by using Up or Down button. ADJUST SHARPNESS SHARPNESS...
- Page 36 LSC(Lens Shading Compensation) : Improve shading of the Lens. LSC OFF LSC ON Reset Reset the camera settings to the factory defaults. SETUP RESET 1.LENS RESET FACTORY 2.EXPOSURE RETURN 3.WHITE BAL 4.DAY / NIGHT AUTO 5.NR 6.SPECIAL 7.ADJUST 8.RESET 9.EXIT Exit Press the SET button in the EXIT menu to save the current settings and exit the SETUP menu.
-
Page 37: Trouble Shooting
Trouble Shooting ● PROBLEM POSSIBLE CAUSE FCheck the power cable, power supply output and video Northing appears on connection between the camera and monitor. the screen. FAre the camera lens or the lens glass dirty? Clean the lens / glass with a soft clean cloth. The image on the FAdjust the monitor controls, as required. - Page 39 uMEMO...
- Page 40 200 New Highway Amityville, NY 11701 631-957-8700 1 800 645 5516 www.specotech.com...
Need help?
Do you have a question about the HHDO15D1G and is the answer not in the manual?
Questions and answers