Selecting Fax Settings - Kodak OFFICE HERO 6.1 Extended User Manual

Faxing

Selecting fax settings

88
Before sending or receiving faxes, set the fax settings.
1. Press Home.
2. Press to select Fax Settings, then press OK.
3. Press or to select a setting, then press
Fax Setting
Fax Sender
Information
Rings to Answer
Fax Print
www.kodak.com/go/aiosupport
Options
--
1 to 6 (default is 4)
1-sided
2-sided*
* You must load 2-sided
originals in the ADF (see
Using the Automatic
Document Feeder
(ADF), page 46
)
or to change the option.
Description
This information appears on the faxes
you send.
Press OK , then enter the fax sender
name (your name), your fax number, and
your phone number (see
numeric keypad on the control panel to
enter text and/or numbers, page
press OK to save.
The number of times that your phone
will ring before the printer picks up the
call.
If you use a dedicated phone line for your
printer, set the Rings to Answer to any
setting. If the printer shares the phone
line with an answering machine, set the
Rings to Answer to a higher number (5
or 6) than the rings to answer for the
answering machine (typically 4 rings).
This allows the answering machine to
pick up phone calls. The printer will
monitor the line after the answering
machine picks up, and, if set to Auto
Answer, will detect an incoming fax and
receive it.
The information you want to fax is on
one side of the page.
The information you want to fax is on
both sides of the page.
Using the
94);