Copying; Loading Originals For Copying; Copying A Document; Using The Default Settings To Copy A Document - Kodak OFFICE HERO 6.1 Extended User Manual

7

Copying

Loading originals for copying

Copying a document

Using the default settings to copy a document

62
You can copy documents and photographs with your all-in-one printer. The printer
produces high-quality color or black-and-white copies on a variety of paper types
(see Paper types, page
You can copy multiple-page, one- or two-sided documents automatically by loading
the originals (up to 35 pages) face up in the Automatic Document Feeder (ADF).
IMPORTANT: The ADF accepts plain paper originals from 6.9 to 8.5 in. (18 to 22 cm) wide
and 9.8 to 14 in. (25 to 36 cm) long.
To copy a photo, documents on thick paper, or a document that is too small or too
large to fit in the ADF, place the original face down on the scanner glass.
For more information on loading originals, see
You can copy a document using the default settings, or you can adjust the quantity,
size, quality, and brightness of your copies.
The default settings are either the factory default settings (see
defaults, page 114), or defaults that you have set on the printer (see Save as Defaults
at the bottom of the table under
page 63).
To copy a document using the current default settings:
1. Place the original document in the ADF or on the scanner glass.
2. Press Copy .
3. Press Start Black to make a black-and-white copy, or press Start Color to make a
color copy.
NOTE: If you load the original document in the ADF, the ADF automatically feeds
the document into the printer when you begin copying.
www.kodak.com/go/aiosupport
38).
Adjusting the settings and copying a document,
Loading originals, page
Resetting factory
45.