Kodak OFFICE HERO 6.1 Extended User Manual page 58

Printing
Using default settings to print a picture
52
Unless you change the default settings, the default for printing pictures is one
4 x 6 in. / 10 x 15 cm picture. (To change the default settings, see Save as Defaults at
the bottom of the table under
To print a picture from a memory card or USB-connected device using the default
settings:
1. Load photo paper (see
2. Insert the memory card into the appropriate slot, or connect the digital camera
or portable drive to the front USB port.
Do not use the memory card slot and the USB port at the same time.
IMPORTANT:
3. Press or to select the picture you want to print.
4. Press Start Black to print a black-and-white picture, or Start Color to print a
color picture.
The printer prints a single 4 x 6 in. / 10 x 15 cm picture.
To prevent loss of data from your memory card, camera, or portable drive,
IMPORTANT:
do not remove it from the printer while printing.
www.kodak.com/go/aiosupport
Changing the settings and printing pictures, page
Loading photo paper, page 42).
front USB port
memory card slot
53.)