Kodak OFFICE HERO 6.1 Extended User Manual page 90

Faxing
Connecting to a
Standard or Cable
telephone service
Connecting to a
Digital Subscriber
Line (DSL)
84
If you have Standard or Cable telephone service, connect one end of the phone cord
that came with the printer into the LINE IN port on the back of the printer and the
other end into the wall phone jack.
If you have DSL telephone service, connect one end of the phone cord that came
with the printer into the LINE IN port on the back of the printer and the other end
into the DSL filter (available from your DSL provider), which is connected to the wall
phone jack.
NOTE: You must use a DSL filter to transmit fax signals properly to your printer.
www.kodak.com/go/aiosupport
DSL filter