Kodak OFFICE HERO 6.1 Extended User Manual page 97

Setting the answer mode (auto answer or manual)
Fax Setting
Dialing Mode
Error Correction
To adjust fax settings from the Online Printer Management Tool:
1. Open the Online Printer Management Tool in a browser (see
Online Printer Management Tool, page
2. Select the Settings tab, then select Fax > Settings.
3. Change the Sender Information and/or fax Settings as needed.
4. Click Save to update the settings.
The default setting for Auto-Answer is on. When Auto Answer is on, the printer
picks up all incoming faxes automatically. The green Auto Answer LED is lit when
Auto Answer is on.
To answer calls manually, turn off Auto Answer by pressing the Auto Answer button
so that the green LED is off. (See
www.kodak.com/go/aiosupport
Options
Tone (default) / Pulse Determines how the printer dials a fax
On (default) / Off
18).
Receiving a fax manually, page
KODAK OFFICE HERO 6.1 All-in-One Printer
Description
number.
Tone dialing (the more common
method) uses tones to dial a phone
number. It is faster and more reliable
than pulse dialing, which uses a series of
pulses to dial a phone number.
Traditionally, pulse dialing was used by
rotary phones; tone dialing is used by
touch-tone phones.
Error correction is applied only when
sending black-and-white faxes. It
reduces the loss of data, which can occur
on poor phone lines.
Error correction increases the send time
on poor phone lines, but the
transmission is more reliable. (Error
correction does not apply to faxes being
received.)
If you are using Vonage or Magic Jack,
we recommend that you set Error
Correction to OFF.
Accessing the
100.)
91