Copying A Photo; Using The Default Settings To Copy A Photo - Kodak OFFICE HERO 6.1 Extended User Manual

Copying a photo

Using the default settings to copy a photo

You can copy a photo using the default settings, or you can make adjustments to the
quantity, size, quality, and brightness of your copies.
The default settings are either the factory default settings (see
defaults, page 114), or defaults that you have set on the printer (see Save as Defaults
at the bottom of the table under
page 68).
To copy a photo using the current default settings:
1. Lift the scanner lid, and place the original photo face down in the right front
corner of the scanner glass.
Do not load photos in the Automatic Document Feeder (ADF).
IMPORTANT:
2. Close the scanner lid.
3. Press Home.
4. Press to select Copy Photo.
5. Press Start Black to make a black-and-white copy, or press Start Color to make
a color copy.
www.kodak.com/go/aiosupport
KODAK OFFICE HERO 6.1 All-in-One Printer
Adjusting the settings and copying a photo,
Resetting factory
67