Table of Contents
Advertisement
Chapter 4 Software & Applications
Introduction
This chapter describes the contents of the support CD-ROM that comes
with the motherboard package.
The support CD-ROM contains all useful software, necessary drivers and
utility programs to properly run our products. More program information is
available in a README file, located in the same directory as the software.
To run the support CD, simply insert the CD into your CD-ROM drive. An
Auto Setup screen automatically pops out, and then you can go on the auto-
installing or manual installation depending on your operating system.
If your operating system is Windows 98SE/ME/2000/XP, it will automati-
cally install all the drivers and utilities for your motherboard.
Installing Support Software
1
Insert the support CD-ROM disc in the CD-ROM drive.
2
When you insert the CD-ROM disc in the system CD-ROM
drive, the CD automatically displays an Auto Setup screen.
3
The screen displays three buttons of Setup, Browse CD and
Exit on the right side, and three others Setup, Application and
ReadMe at the bottom. Please see the following illustration.
The Setup button runs the software auto-installing program as explained in
next section.
The Browse CD button is a standard Windows command that you can
check the contents of the disc with the Windows 98 file browsing interface.
Chapter 4: Software & Applications
29
Advertisement
Table of Contents
