Setting The Oven; Types Of Heating And Temperature; Care And Cleaning; Upper Glass Cover - Bosch HGV52D123Q Instruction Manual

Setting the oven

Here you can find out how to set the oven.

Types of heating and temperature

Example in the picture: 190 °C,
1. Use the function selector to select the required type of heating.
2. Use the temperature selector to set the temperature.

Care and cleaning

With attentive care and cleaning, your hob and oven will retain its
looks and remain in good working order for a long time. We will
explain here how you should care for and clean them correctly.
Notes
Slight differences in the colours on the front of the oven are
■
caused by the use of different materials, such as glass, plastic
and metal.
Shadows on the door panel which look like streaks, are caused
■
by reflections made by the oven light.
Enamel is baked on at very high temperatures. This can cause
■
some slight colour variations. This is normal and does not affect
operation. The edges of thin trays cannot be completely
enamelled. As a result, these edges can be rough. This will not
impair the anti-corrosion protection.

Upper glass cover

Before opening the top cover, remove any spills with a cloth.
Use glass cleaner if possible.
For cleaning, remove the top cover. To do this, hold the cover
securely on both sides with both hands and pull it upwards.
Stainless steel fronts Wipe with some washing-up liquid and a damp cloth. Always wipe parallel to the natural grain. Otherwise, you
may scratch the surface. Dry with a soft cloth. Remove flecks of limescale, grease, starch and albumin (e.g. egg
white) immediately. Do not use any abrasive materials, scouring sponges or rough cleaning cloths. The stain-
less steel fronts can be polished using a special care product. Follow the manufacturer's instructions. You can
purchase special stainless steel cleaner from our after-sales service or from specialist retailers.
Enamel surfaces and Clean with some washing-up liquid and a damp cloth. Dry with a soft cloth.
lacquered surfaces
60
< 3D hot air.
The oven heats up.
Switching off the oven
Turn the function selector to the off position.
Changing the settings
The type of heating and temperature can be changed as required.
If the cover hinges become loose, note the letters marked on
them. The hinge with the letter R must be fitted on the right, and
the hinge with the letter L must be fitted on the left.
After cleaning, re-assemble the top cover following the same
procedure in reverse order.
Only close the top cover once the burners have cooled down.

Cleaning agents

Damage to the various different surfaces caused by using the
wrong cleaning agent can be avoided by observing the following
instructions.
When cleaning the hob do not use
undiluted washing-up liquid or dishwasher detergent,
■
scouring pads,
■
abrasive cleaning agents such as oven cleaner or stain
■
remover,
high-pressure cleaners or steam jets.
■
Do not clean individual parts in the dishwasher.
■
When cleaning the oven do not use
sharp or abrasive cleaning agents,
■
cleaning agent with a high alcohol content,
■
scouring pads,
■
high-pressure cleaners or steam jets.
■
Do not clean individual parts in the dishwasher.
■
Wash new sponges thoroughly before first use.