Maintenance - HOMCOM A90-282V90 User Manual

Table of Contents

Advertisement

Available languages

Available languages

REGULAR MAINTENANCE OF THE TREADMILL
STORAGE: Keep your equipment in a enclosed place, away from dust or humidity.
Don't store it neither in a garage or in a indoor backyard, or near the water. Humidity,
dust and water could damage it and have an effect on its functionality.
ELECTRIC CABLE: Make sure that the cable and plug are in perfect conditions. Elec-
tric cables must be away from hot surfaces.
SCREWS AND CONNECTING CABLES: Supervise and tighten the screws on a
regular basis, because due to the vibration the screws and nuts tend to loosen.
LUBRICATION: It's a correct lubrication of the treadmill with silicon oil or teflon is really
important. This lubrication must be performed regularly depending on its use even before
the first use.
a) The step to lubricate the running board is as follows: (see the above figure)
b) Stop the running belt and fold the treadmill.
c) Turn over the running belt at the back of the main frame.
Insert the lubricant pot as deep as possible into the middle
of the running belt. Apply the lubricant onto the inner side of
the running belt. Lubricate both sides of the running belt.
VI. MAINTENANCE
This product must be earthed. If the power cord
is damaged, it must be replaced with a manu-
facturer recommended power cord.
DO NOT TANGLE THE POWER CORD
27

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the A90-282V90 and is the answer not in the manual?

Table of Contents