Maintenance Instructions - HOMCOM A90-246 User Manual

6

MAINTENANCE INSTRUCTIONS

Proper maintenance keeps your treadmill in optimal condition, improper care and maintenance can result in
an injury or shorten the life of the treadmill.
Warning: Always unplug the treadmill before cleaning or maintaining the appliance!
6.1 Frequent inspections are required to ensure any to wear and damage is detected early; worn or
damaged accessories (such as motors, electronic controls, power cords, running belts), after
maintenance or professional repairs, are safe to use as they leave the factory. ).
6.2 Immediately replace the defective parts and repair the equipment (such as the power cord).
6.3 Pay special attention to the most easily worn components (such as running belts).
6.4 Clean the treadmill regularly to keep parts clean.
6.5 After each use of the treadmill, use a clean towel or cloth to clean the meter and other parts with
sweat and debris. Please be careful not to splash water on any electrical components and under the
running belt.
6.6 Please place your treadmill in a clean and dry environment, ensure the power is turned off and the
power cable has been unplugged.
6.7 To facilitate easy movement, the treadmill is equipped with wheels, please ensure you disconnect the
power before moving.
6.8 In order to maintain and extend the life of the treadmill, it is recommended that you rest the treadmill
for 10 minutes after continuous use for 30 minutes.
6.9 The running belt has been adjusted before leaving the factory, but after use, the running belt will be
stretched and will deviate from the centre position, causing the running belt to rub the side bars and
the rear cover and damage it. It is normal for the running belt to be forced to stretch during use. After
using the treadmill for a period, if the running belt slips or is not smooth when using the treadmill, you
can adjust the tightness of the running belt to improve it, as indicated below.
~ 8 ~