Setting The Date And Time - Kodak EasyShare DX4330 User Manual

Setting the Date and Time

The Date & Time screen is displayed the first time you turn on the camera or if
the battery is removed for more than 10 minutes. If this is the first time the
camera has been turned on, go to Step 3.
To set the date and time after that:
DELETE
MENU
Menu
OK
NOTE: Depending on your computer operating system, KODAK EASYSHARE
Software may allow your computer to automatically update the camera
clock when you connect the camera. See the KODAK EASYSHARE
Software Help for details.
8
Chapter 1
1
Share
2
3
REVIE
EasyShare
4
5
6
Turn on the camera, then press the Menu
button.
Press to highlight Setup Menu, then
press the OK button.
Press to highlight Date & Time, then
press the OK button.
The date format is YYYY/MM/DD. The time
is displayed in a 24-hour format.
Press to adjust the date and time.
Press to move to the next setting.
When finished, press the OK button.
Press the Menu button to exit the menu.
The setting remains until you change it.