Displaying Pictures And Videos On A Television - Kodak EasyShare DX4330 User Manual

Turning On Slide Show Loop
When you turn on Loop, the slide show is continuously repeated.

Displaying Pictures and Videos on a Television

You can display pictures and videos on a television, computer monitor, or any
device equipped with a video input. (Images may not look as good on a
television as on a computer monitor or when printed.)
NOTE: Ensure that the Video Out setting is correctly set to NTSC or PAL
(page 52).
NOTE: If you connect or disconnect the audio/video cable while a slide show is
running, the slide show stops.
Chapter 4
1
On the Slide Show menu, highlight Loop,
then press the OK button.
2
Highlight On, then press the OK button.
When you start a slide show, it repeats
until you cancel it by pressing the OK
button or until battery power is
exhausted. The Loop setting remains until
you change it.
1
Connect the audio/video cable from the
camera video-out port to the television
Video
video-in port. (Refer to your television
out
User's Guide for details.)
The camera LCD turns off; the television
screen acts as the camera display.
2 Review pictures and videos on the television
screen.
41