Table of Contents
Advertisement
Camera
Problem
Camera does not
turn off; lens does
not retract.
Shutter button does
not work.
Stored pictures are
damaged.
70
Chapter 10
Cause
Alkaline batteries were
installed in the camera.
Camera is not turned on. Turn on the camera
The camera is
processing a picture; the
ready light (near the
viewfinder) is blinking.
The card or internal
memory is full.
The card was removed
when the ready light was
blinking.
Solution
DO NOT USE ALKALINE
BATTERIES. Turn the Mode
dial off, remove the alkaline
batteries, and replace with
an approved battery type
(page
95).
If the Mode dial is not off
when you replace the
batteries, the camera may
not turn back on. In that
case, turn the Mode dial off,
then back on.
(page
7).
Wait until the light stops
blinking before attempting
to take another picture.
Transfer pictures to your
computer
(page
59), delete
pictures from the camera
(page
37), switch storage
locations
(page
11), or
insert a card with available
memory
(page
10).
Make sure the ready light is
not blinking before
removing the card.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
