Setting Long Time Exposure - Kodak EasyShare DX4330 User Manual

Setting Long Time Exposure

Use Long Time Exposure to control how long the shutter stays open. Settings
are: None, 0.7, 1, 1.5, 2, 3, and 4 seconds.
NOTE: Long Time Exposure cannot be used with Exposure Compensation.
1 To avoid blurry pictures, place the camera on a flat, steady surface or use a
tripod.
2 In any Still mode, press the Menu button.
3
Highlight Long Time Exposure
Available flash settings:
Default flash setting:
Camera returns to default: When you change modes or turn off the
Chapter 2
, then press the OK button.
4
Press
5
Press the OK button to accept the change.
6 Press the Menu button to exit the menu.
7 Use the LCD to frame your subject. Press the
Shutter button half-way to set the focus,
then continue pressing completely down
to take the picture.
This setting remains until you move the
Mode dial or turn off the camera.
Auto, Flash Off, Fill Flash, Red-eye
Off
camera.
to select an option.
27