Table of Contents
Advertisement
Camera/Computer Communications
Camera Communications
Problem
The computer
cannot
communicate
with the camera.
Cannot transfer
pictures to
computer. The
Add New
Hardware
Wizard cannot
locate drivers.
74
Chapter 10
Cause
Camera power is off.
Battery is not charged.
Some Advanced Power
Management utilities on
laptops can turn off ports
to save battery life.
USB cable is not securely
connected.
Software is not installed. Install the software
The Battery Monitor or
similar software runs
constantly.
Software is not installed
on computer.
Solution
Turn on the camera
(page
7).
Replace
(page
5) or recharge
the batteries
(page
See the Power Management
section of your laptop user's
guide to disable this feature.
Connect cable to camera and
computer port
(page
(page
55).
Close that software before
starting the KODAK
EASYSHARE Software.
Disconnect USB cable (if using
Camera Dock, disconnect
cable and remove camera
from Dock). Install KODAK
EASYSHARE Software
(page
55).
66).
59).
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
