Kodak EasyShare DX4330 User Manual page 85

Camera
Problem
Picture is not clear. The lens is dirty.
Slide show does
not run on external
video device.
Chapter 10
Cause
Subject too close when
taking picture.
Subject or the camera
moved while the picture
was taken.
The subject is too far
away for the flash to be
effective.
Video Out setting is
incorrect.
External device is set
incorrectly.
Solution
Clean the lens (page
Move so there is at least 2.0
ft (0.6 m) between the
camera and the subject, or at
least 2.8 in. (7.0 cm) in
Close-up mode.
Hold the camera steady
while taking the picture.
Move so there is no more
than 11.2 ft (3.4 m) between
the camera and the subject;
6.6 ft (2.0 m) in Telephoto.
Adjust the camera Video Out
setting (NTSC or PAL,
page 52).
Refer to the external device's
user's guide.
92).
73