Setting The Orientation Sensor; Other Features - Kodak EasyShare DX4330 User Manual

Setting the Orientation Sensor

If you rotate the camera to take a picture (for example, a portrait shot), the
Orientation Sensor rotates the picture so that it is displayed correct side up
during Quickview and Review.
The Orientation Sensor is turned on as the default. You can turn it off so that
pictures are displayed in their original orientation.
NOTE: When your subject is above or below you (such as pictures of an object
in the sky, on the ground, or when pointing down at small objects on a
table), turn off the Orientation Sensor so that pictures are not rotated
unnecessarily.
1
In any Still mode, press the Menu button.
2 Highlight Orientation Sensor

Other Features

m
Choosing Internal Memory or MMC/SD Card, page 11
m
Taking Videos, page 31
m
Tagging Pictures and Videos, page 45
30
Chapter 2
, then press the OK button.
3 Highlight On or Off, then press the OK
button.
4 Press the Menu button to exit the menu.
This setting remains until you change it.