Connecting To The Computer - Kodak EasyShare DX4330 User Manual

8

Connecting to the Computer

CAUTION:
Install the software from the KODAK EASYSHARE Software
CD before connecting the camera or dock to the computer.
Failure to do so may cause the software to load incorrectly.
Connecting to the Computer
You can transfer pictures and videos from the camera to the computer using
either the provided USB cable or the optional KODAK EASYSHARE Camera
Dock or Camera Dock II. See
Connecting With the USB Cable
NOTE: You can also use a KODAK Multi-Card Reader or KODAK SD Multimedia
Card Reader-Writer to transfer your pictures. See your KODAK retail
dealer or visit
page 61
1 Turn off the camera.
2
Plug the labeled
into the labeled USB port on your computer.
See your computer User's Guide for details.
3
Plug the other end of the USB cable into the
labeled USB port on the camera.
An optional 3V AC adapter is available for
your camera; it saves battery power when
transferring pictures (see
http://www.kodak.com/go/accessories.
for connecting with a Camera Dock.
end of the USB cable
page 96).
59